PI550A1


1 to 25CV

220V/380V~440V/480V

PLC functions.

Motors: permanent magnet asynchronous and synchronous induction.

Basic frequency inverter for simple applications.

HIGHLIGHTS:

  • Low power
  • Compact
  • Simple speed regulation
  • Wall and DIN rail installation
  • Higher overload current
  • Shorter hydration time
  •  Industries: textile, papermaking, wires, packaging, food, fan, water pump and small automatic machines.
    Quero este produto

    Preencha os campos abaixo para entrar em contato conosco:

    Technical characteristics
    Control SystemDSP-based high-performance vector control inverter
    Control MethodV/F control, W/O PG control vector
    Automatic torque increasePerforms low frequency (1 Hz) and self-control of output torque in V/F mode
    Accelerate/Decelerate ControlDirect or S-curve mode, 4x available time range is 0.0 to 6500.0 s
    V/F curve modeLinear, square root/m-th power, standard V/F curve
    Overload capacityType G: rated current 150% - 1 minute, rated current 180% - 2 seconds Type F: rated current 120% - 1 minute, rated current 150% - 2 seconds
    Maximum Frequency1- Vector control: 0 to 300Hz; 2- V/F control: 0 to 3200Hz
    Carrier frequency0.5 to 16 kHz, automatic frequency adjustment according to load
    Torque increaseAutomatic torque boost, manual torque boost (0.1% to 30.0%)
    DC brakingDC braking frequency: 0.0 Hz to max. frequency, braking time: 0.0 to 100.0 seconds, braking current value: 0.0% to 100%
    Race controlJog frequency range: 0.00 Hz to max. frequency; AC jog/deceleration time: 0.0 to 6500.0s
    Built-in PIDEasy-to-realize closed-loop control system for process control
    Automatic voltage regulationMaintains a constant output voltage when the mains voltage changes
    Customization Function
    Self-inspection of peripherals after power onAfter turning on the peripheral equipment, it will perform safety tests, such as grounding, short circuit, etc.
    Common DC BusMultiple inverter can use a common DC bus;
    Fast current limitingThe current limiting algorithm is used to reduce the probability of inverter overcurrent and improve the drive capacity without interference.
    Time controlTime control function: time setting range (0 min to 6500 min)
    Operation
    Input term. DI16 digital input terminals, DI5 can be high-speed pulse input (ψ2 0~100kHz)
    Analog Input AI11 analog input terminal AI1, can choose 0~10v or 0~20mA input
    Multi-speedMax. 16 set speeds (using multifunction terminal or program)
    Emergency StopInterrupt controller output
    Fault resetWhen the protection function is active, it can automatically/manually reset the condition
    PID Feedback SignalIncluding DC (0 to 10V) DC (0 to 20mA)
    output terminal1 collector output terminal SPA, 1 relay output terminal, 1 analog output terminal DA1
    SPA relay outputEach port has 40 signals that can be optional, relay contact capability, normally open contact 5A/AC 250V, 1A/DC 30V
    Frequency1 analog output, 16 signals can be selected such as frequency, current, voltage and others, output signal range (0 to 10V / 0 to 20mA)
    Command execution channel3 channels: operation panel, control terminals and serial communication port. They can be exchanged in several ways
    Operation functionLimit frequency, skip frequency, frequency compensation, self-tuning, PID control
    Frequency SourceTotal of 8 frequency sources: digital, analog voltage, multispeed and port serial. They can be exchanged in several ways
    Inverter ProtectionOvervoltage protection, undervoltage protection, overcurrent protection, overload protection, overheat protection, overcurrent protection, against overvoltage, protection against phase loss (optional), external fault, communication error, PID feedback signal abnormalities, PG fault and ground short circuit protection
    LED display keyboardOperation information - Monitoring objects: operating frequency, set frequency, voltage bus, output voltage, output current, output power, output torque, status input terminal status, output terminal status, analog AI1 value, actual speed motor operation, percentage of PID set value, PID feedback value.
    LED display keyboardError Information - Saves a maximum of three error messages, the time, type, voltage, current, frequency and working status can be requested when failure occurs.
    Key lock and selectionLocks part/all keys, defines scope of key function to prevent misuse
    IGBT TemperatureDisplays the current IGBT temperature
    RS485Built-in RS485
    Ambient Temperature-10 to 40°C (Ambient temperature in 40~50°C, please use reduction D41)
    Temp. storage-20~65°C
    Ambient humidityLess than 90% R.H, non-condensing
    VibrationBelow 5.9 m/s² (=0.6 g)
    Application locationsIndoor where there is no sunlight or corrosion, explosive gas and water vapor, dust, flammable gas, oil or salt, etc.
    AltitudeNo reduction below 1000m, 1% reduction every 100m up to 3000m
    Protection levelIP20
    Cooling methodForced air cooling
    Cadastre seu e-mail abaixo e receba nossos conteúdos
    Virtual store
    Acesse nossa loja do Mercado Livre e adquira nossos produtos seriados.